BrandBECKER TECHNOLOGIES
CategorySYSTEM SOLUTIONS
DeterminationMilitary
Deployment Options
- Re-Bro Frequency Range: 1.6 – 30 to 30 – 88 or 88 – 170/512 Mhz
- RX sensitivity: -112dBm
- TX Power: HF 1.6-30 -up to 125W
- TX Power: VHF 30-88 -up to 100W
- TX Power: V/UHF 88 – 170 / 512* up to 100W
- Power Supply: 10-32Vdc
Performance
The Becker Technologies radios are all capable of being connected to any other Becker Technologies radio via a cross-connect cable for combinations of Crossband or Re-Bro Systems.
In Cross-Connect Mode, audio is routed straight through (Transparent) to allow COMSEC (Secure Digital Voice) to be used via the repeater/re-bro.
- ALCES 1 – ALCES 1 HF – VHF/UHF
- ALCES 1 – FELES 3 HF – VHF/UHF
- FELES 3 – FELES 3 VHF – UHF
Antennas
- For HF the following Antenna is recommended:
Wide Band HF DIPOLE (1.6-30 Mhz) - For VHF the following Antenna is recommended:
Wide Band VHF Disc Cone (30-88 Mhz)
Narrow Band Option: Dipole Stack or Co-Linear - For V/UHF the following Antenna is recommended:
Wide Band V/UHF Disc Cone (100-512 Mhz)
Option: Dipole Stack or Co-Linear
Power Supply
- For a semi/permanent repeater system, the Becker Technologies Repeater PSU unit SKU# PS-PB-R is recommended which includes a 12V AC- DC and DC SOLAR Charger.
- Up to 3 x 120W Flexible Solar panels can be connected to the power Box, however, any DC up to 18V can be connected to charge the Repeater Battery.
- The AC input Range is 160 – 270 Vac to charge the battery.
- The Repeater Battery could be 100 – 200 Ahr @ 12V depending on the required mission or UP time expected with available sun hours for the location.
When Connected To BECKER TECHNOLOGIES Power Amplifiers
URSUS 2 Dual Multiband PA; HF is amplified to 125W, VHF/UHF is amplified to 100W.
URSUS 1 VU Dual-band PA; VHF/UHF is amplified to 100W, HF in bypass mode.
URSUS 1 H, HF band PA, only HF is amplified to 125W, VHF, and UHF in bypass mode.
